Digital video camera

The Wazer is the first “desktop” waterjet cutting machine. The principle of waterjet cutting is simple: water is projected at extremely high pressure (between 4,000 and 6,000 bars), to which an abrasive agent (garnet sand) is added. The latter, carried by the power of the high-pressure jet, can reach a speed of Mach 2.5 (2.5 x the speed of sound) and thus enable the cutting of very hard elements.

Materials that can be cut with this machine:
Marble ( 12.7 mm Max) / Glass ( 15.8 mm Max) / Aluminium ( 12.7 mm Max) / Steel ( 4 mm Max)/ Silicone ( 12.7 mm Max) / High-density polyethylene (HDPE) ( 12.7 mm Max) / Carbone ( 6.3 mm Max) / Carbon fibres ( 4.78 mm Max).
This list is not exhaustive; please, contact us to check if your material is compatible.

Cutting surface:
305×460 mm

The 3D printer from Markforged is the first of its kind, using the new CFR technology: Continuous Fiber Reinforcement. This method, based on FDM printing, makes it possible to add, inside the printed part, continuous fibres (carbon, glass or Kevlar), which can be extruded with the help of a nozzle and thus fused with the part, giving it tenfold strength in addition to other properties, depending on the type of fibre chosen. The reinforcement strategy (number of lines, layers, orientation, etc.) can be chosen according to loading conditions.

The base material is either nylon or “Onyx”, a nylon filled with carbon micro-fibres. Onyx, when used alone, is five times stronger than ABS. With the addition of fibre reinforcement, it can offer the strength of aluminium.

Features 
Printing volume: 32 x 13.2 x 15.4 cm
Layer thickness: from 0.1 to 0.2 mm
Very good dimensional stability
High strength

Rates

*Optional – The volume of fibre reinforcement required is calculated when preparing the print files.

Only the first 15 / 30 minutes will be charged at the time of booking. The balance can be paid on site.

The digital embroidery Brother Innov-is NV2600 machine can be used both manually (like a conventional sewing machine) and by numerical control (to make designs, images or text, embroidered on your fabrics).
It is also possible to create your own designs to be set up on the proprietary software of the PE Design machine.

Features

• 7 drive claws
• 14 alphabets
• 227 integrated embroidery designs

Only the first 15 / 30 minutes will be charged at the time of booking. The balance is to be paid on site.